Every mining student can recite "the manager is responsible for everything". But on a real mine, safety is a team sport, and Chapter IV of the new Central Rules is where that team gets its structure. It deals with the national advisory boards at the top, and then, much closer to the pithead, with the Safety Committee and the Safety Officer.
This is part 2 of our chapter-wise series. If you have not read the first part on registration and accident reporting yet, start with Registration, Employer Duties and Accident Reporting.
- National Board and Technical Committees (Rules 11-13)
- Safety Committee: who, how often, what it does (Rules 14-17)
- Safety Officer in mines (Rules 20-21)
- Safety Officer in dock and construction work (Rules 18-19)
- Quick FAQs
National Board and Technical Committees (Rules 11-13)
These rules are mostly about governance, but they are fair game for short-answer questions.
- National Occupational Safety and Health Advisory Board: certain members, those under clauses (g), (j), (k), (l) and (m) of section 16(2) of the Code, are appointed by the Central Government through notification. The Board meets as and when required.
- A non-ex-officio member can resign in writing to the Chairperson. The seat falls vacant on acceptance, or after 30 days from receipt of the letter, whichever is earlier.
- A member who misses three consecutive meetings without the Chairperson's leave ceases to be a member, unless the Government decides there was sufficient cause.
- Disqualifications: unsound mind declared by a competent authority, an undischarged insolvent, or a conviction for an offence carrying imprisonment of three months or more.
- Technical or Advisory Committees (Rule 12) can be set up to assist the Board. For these, the cut-off for absence is two consecutive meetings, not three.
Rule 13 adds a data duty: employers must furnish statistics on inter-State migrant workers and their occupational safety and health electronically on a portal designated by the Central Government.
Safety Committee: who, how often, what it does (Rules 14-17)
When is a Safety Committee compulsory?
Under Rule 14, every establishment with 500 or more workers must set up a Safety Committee of employer and worker representatives. The Central Government can vary the threshold for different classes of establishments by order.
Read those numbers again, because they are classic exam fodder. The committee's tenure is three years. It must meet at least once every quarter, but in mines, at least once a month. And the employer has to act on the committee's recommendations within fifteen days of receiving them.
The committee must also be kept properly informed about the potential safety and health hazards workers face, and about accident data and data from surveillance of the working environment and workers' health.
Composition in mines (Rule 16)
Mines get their own composition rule. The committee has an equal number of employer and worker representatives, not exceeding twenty in total. The employer's side looks like this:
- The manager (the manager under section 67 of the Code) is the Chairman.
- Five officials or competent persons of the mine, nominated by the Chairman.
- The Safety Officer acts as Secretary. If there is no safety officer, the senior-most official next to the manager takes that role.
Workers' representatives are nominated by the sole negotiating union or negotiating council (in proportion to union membership), or, where there is none, chosen by the workers from among themselves, possibly through an electronic process. Three conditions stand out:
- There must be adequate representation of women, not less t han their share of the total workforce.
- At least one worker representative each from mining, electrical and mechanical disciplines must be nominated or elected.
- If there is no recognised union and a dispute arises, the Regional Labour Commissioner (Central) hears the parties and decides. That decision is final.
For non-mining establishments (Rule 15), the management side is a senior official as Chairman, the Safety Officer as Secretary along with a qualified medical practitioner where available, and one representative each from production, maintenance and purchase. The committee must keep recorded minutes of every meeting.
Functions of the Safety Committee in mines (Rule 17)
- Discuss remedial measures against unsafe conditions and practices pointed out in representatives' reports, and make recommendations.
- Consider the proposed safety and health measures before starting operations in any new area, installing an oil mine installation, commissioning a new electrical or mechanical installation, or introducing a new mining technique.
- Discuss reports of inquiry into accidents and dangerous occurrences and recommend action.
- Run safety campaigns based on analysis of accidents and dangerous occurrences.
- Serve as a forum for communication on safety and occupational health.
- Discuss the Standard Operating Procedures (SOPs) prepared for plant, equipment, installations and methods.
- Review the Safety Management Plan.
Safety Officer in mines (Rules 20-21)
When is one required? At every mine where 100 or more workers are ordinarily employed. The scale is one safety officer up to 500 workers, plus one more for every additional 500 workers or part thereof.
Qualifications
| Type of mine | Required qualification |
|---|---|
| Coal, belowground | First Class Manager's Certificate of Competency (Coal) from DGMS |
| Coal, opencast | First Class Manager's Certificate (Coal), or the one restricted to mines having opencast workings only |
| Metalliferous, belowground | First Class Manager's Certificate of Competency (Metal) from DGMS |
| Metalliferous, opencast | Manager's Certificate (Metal), or the one restricted to opencast workings only |
| Coal or metal mine with more than one safety officer | A safety officer with a degree in mechanical engineering may also be appointed, reporting to the mining engineering safety officer |
| Oil mines | Degree in engineering or industrial safety (or PG diploma in industrial safety from the Central or Regional Labour Institutes) plus 5 years of management or supervision experience in oil mines |
Duties
The Safety Officer assists the manager on safety matters and must make sure an appropriate emergency plan is in place and implemented. Except in an emergency, no other duties can be loaded onto them. They must also keep a detailed record of their work in a bound, paged book or in a retrievable, non-editable electronic form. The core duties include:
- Visiting surface, above-ground and underground parts to meet employees on the spot and invite suggestions.
- Taking charge of newly recruited staff and showing them the mine, pointing out safe and unsafe acts.
- Investigating all accidents, dangerous occurrences and incidents, including minor ones, and analysing common causes.
- Maintaining detailed accident statistics.
- Apprising the manager of all possible sources of danger, such as inundation, fire, coal dust and blowouts in oil mines.
- Holding safety classes, safety weeks and talks for supervisors.
- Making sure employees know standing orders, codes of practice and support plans.
- Helping to plan mine-level training, including vocational training, gas testing, fire-fighting and first aid.
- Reporting to the manager after each visit on whether the Code, rules and regulations are being foll owed.
Safety Officer in dock and construction work (Rules 18-19)
Not directly mining, but short questions come from here too. Dock work establishments with 500 or more workers and construction sites with 250 or more workers must employ safety officers on a sliding scale. For construction: one up to 500 workers, two up to 1,000, three up to 2,000, four up to 5,000, and one more for every additional 2,000 or part. For dock work: one up to 1,000, two up to 2,000, three up to 5,000, four up to 10,000, and one more per additional 5,000 or part.
Eligibility is built around an engineering or technology degree with at least two years of supervisory experience, or a physics or chemistry degree with five years, or a diploma with five years, or a recognised degree or diploma in industrial safety. Their duties include advising on job safety studies, plant safety inspections, accident and disease investigation and training.
Quick FAQs
- Registration, Employer Duties and Accident Reporting (Chapters I-III)
- Safety Committees, Safety Officers and Advisory Boards (Chapter IV) - you are here
- Health, Safety and Working Conditions: Ventilation, Dust, Lighting, Water (Chapter V)
- Welfare Provisions: Canteen, First Aid, Creche, Rest Rooms, Mock Drills (Chapter VI)
- Working Hours, Registers, Inspector-cum-Facilitator and Women Workers (Chapters VII-X)
- Mine Manager Qualification and Medical Examination of Mine Workers (Chapter XI Part IV (Rules 107-122))
- Mines Rescue: Rescue Stations, Rescue Rooms and Rescue Teams (Chapter XI Part IV (Rules 123-156))
- Vocational Training in Mines: Centres, Trainers and Certificates (Chapter XI Part IV (Rules 157-176))
- Contract Labour and Inter-State Migrant Workers (Chapter XI Parts I-III)
- Enquiries, Offences, Compounding and Miscellaneous Rules (Chapters XII-XIV)
Source: Occupational Safety, Health and Working Conditions (Central) Rules, 2026, notified by the Ministry of Labour and Employment on 8 May 2026 as G.S.R. 345(E). This post is a plain-language study guide, not legal advice. For compliance decisions or exams, always read the original Gazette text and any later amendments or orders.

0 Comments