Indian Minerology

SOP for Grader Operator Standard Operating Procedure (SOP) for Grader Operator Construction & Roadwork Safety Guidelines Objective The purpose of this SOP is to establish safe and efficient operating procedures for grader (GREDAR) operators in construction and roadwork projects. Scope This SOP applies to all grader operators, site supervisors, and project managers engaged in grading and leveling tasks. Main Responsibilities Operate the grader safely and efficiently according to site requirements. Conduct pre-start checks of brakes, lights, hydraulics, and tires. Follow site safety rules and speed limits. Maintain clear communication with ground staff. Document daily operational records and report faults. Step-by-Step Operating Procedure 🔹 Step 1: Pre-Operation Inspection Check fuel, oil, coolant, and hydraulic fluid levels. Inspect blades, tires, and cutting edges for ...

SOP for Tipper Operations. Before starting the tipper the operator should check for any tags of “B/D” “Out of order” or “Under repair”. If any such tag is visible, the tipper shall not be started. Before driving the tipper, the driver should personally come up to speed and test the following details:- Brake horn and AVA are in proper working order. Head light, back light and dash board lights are in working order. The machine is mechanically sound and in efficient working order. Fire extinguisher is available. Only authorized driver shall drive the tipper. While driving the tipper in slope the driver shall drive the vehicle in lower gear. The driver of the tipper shall keep his tipper in front of the loader in such a manner that the operator of the tipper and the loader are visible to each other. The driver of the tipper shall not leave his vehicle in front and shall remain inside his tipper while moving. Only two t...

SOP for Drill Operations 1. Before starting the drill the operator should check for any tags like “B/D” “Out of order” or “Under repair”. If any such tag is visible, the operator should not start the machine. 2. Before running the drill the drill operator should personally inspect the following details of the drill. Lights and horn are working properly. Track chain, feed chain and jack are working properly. Fire extinguishers are available. Oil or water leakage. 3. Only authorized drill operator should operate the drill. 4. Glass of operator cabin of the drill should be kept thoroughly clean for good visibility during operation. 5. Drill operator should not allow any unauthorized person to ride on the drill during operation. 6. Drill operator should see that the wet drilling arrangement/NVE of the drill is working properly. If any deficiency is observed, it should be reported to the higher authority.  7. Before starting the drilling operation, the drill operator should ...

Safe Operating Procedure for Tipper 1. Operators should check for any tags of “B/D” “Out of Order” or “Under Repair” before starting. If any such tag is visible, the operator should not start.  2. Before operating the Dumper/Tipper, the operator should personally inspect and test the following details:- That the brakes, horn and AVA are working properly.  That the head lights, back lights and dash board lights are working properly.  That the machine is mechanically sound and in efficient working order. Fire extinguisher is available.  3.  The Dumper/Tipper should be operated by an authorized Dumper/Tipper operator only.  4.  The Dumper/Tipper operator cabin glass should be kept properly clean for good visibility during operation. 5. Before starting the operation, the operator shall personally check the surroundings of the dumper/tipper.  6. The dumper/tipper operator shall take the dumper/tipper for operation only when he is ...

Safe handling procedure for dump (overburden) 1. The overburden (O.B.) shall be dumped at a distance of 3.5 m from the edge of the O.B. dump and the dozer shall push the same O.B. 2. Operators shall not drive their vehicles into the “non-operational area” which is designated by a berm of a minimum height of 1.5 m. 3. Operators shall not drive their vehicles on unstable surfaces or edges which are designated by flag posts, signs etc. to warn. 4. On entering the O.B. dump, the dumper/tipper operator shall visually inspect the general area of ​​the O.B. dump. All due care shall be taken by the dumper/tipper operators regarding the position of the rear wheels of the dumper/tipper on the dumping face. The dumper/tipper operator shall not reverse the dumper/tipper into an area which he has not visually inspected. 5. When dumping is done in an area where no berm exists, the O.B. shall be dumped before any edge which shall be pushed into position by the dozer and shall be constantl...

SOP for Dozer Operations Before starting the operator should check for any tags like “B/D” “Out of order” or “Under repair”. If any such tag is visible, the operator should not start. Before operating the operator should personally get up to speed and test the following details:- Brake horn and AVA (Audio visual alarm) are working properly. Head light, back light and dash board lights are working properly. Machine is mechanically sound and in efficient working order. Fire extinguisher is available. 3.Dozer should be duly operated by authorized dozer operator. 4. Glass of dozer operator cabin should be kept properly clean for good visibility during operation. 5. Operator should personally check the area around dozer before starting operation. 6. Operator of dozer shall not allow any person to ride on dozer during operation.  7. The operator of the dozer should operate his machine only on stable ground. 8. The dozer should not operate on steeply sloping ground or in a pla...